+49 (0) 2335 9781-0

TAS 3073 Mini Reihe

130

TAS 130

Product Information

Technical Specifications

Table

d (mm) D (mm)M t (Nm)F ax (kN)p W (N/mm²)p N (N/mm²)Z (Stk.)SM A (Nm)L (mm)L1 (mm)Weight (kg)
20x47530522641106M 6 x 251742480.41
22x47580522391106M 6 x 251742480.38
24x50630522171006M 6 x 251742480.42
25x50660522081006M 6 x 251742480.41
28x55740521941006M 6 x 251742480.5
30x55790701821006M 6 x 251742480.47
32x601150702261208M 6 x 251742480.56
35x601300702091208M 6 x 251742480.53
38x651300701881108M 6 x 251742480.62
40x651400701801108M 6 x 251742480.57
42x7520001002091206M 8 x 304151591.01
45x7522001001971206M 8 x 304151590.98
48x8032001302491508M 8 x 304151591.09
50x8033001302391508M 8 x 304151591.07
55x8536001302151408M 8 x 304151591.15
60x9039001301941308M 8 x 304151591.23
65x9543001301771208M 8 x 304151591.32
70x11075002102031308M 10 x 308361712.18
75x11580002101961308M 10 x 308361712.3
80x12085002101791208M 10 x 308361712.44
85x1251140027021715010M 10 x 308361712.55
90x1301200027020114010M 10 x 308361712.67
95x1351260028019013510M 10 x 308361712.8
100x145150003001851308M 12 x 3514568803.9
110x155165003001671208M 12 x 3514568804.2
120x1652250037019014010M 12 x 3514568804.5
130x1802900045020615012M 12 x 3514568805.5
140x1903200046017513010M 14 x 4021076906.6
150x2004100055019815012M 14 x 4021076906.9
160x2104400055018314012M 14 x 4021076907.4
170x2255450064021016014M 14 x 4021076908.6
180x2355750064019015014M 14 x 4021076909.1
190x2506500068919114615M 14 x 40210769010.6
200x2606800068918314115M 14 x 40210769011.2
220x2858200074714110912M 16 x 503259811417.7

Description Of Function

The main function of a locking assembly is the safe connection of a shaft to a hub by means of friction. For example, between a shaft and a gear hub. The locking assembly creates a play-free connection by expanding between the shaft and the hub. This type of connection is used mainly for transmitting torque.

It is installed by inserting the locking assembly between the components and the subsequent tightening of the screws. By using conical surfaces, the outer diameter increases and the inner diameter reduces. Radial pressure is built up. The clamping forces are provided and controlled by the screws (force-controlled). This allows the direct compensation of the clearance between shaft and hub.

The supplied locking devices are ready for installation.

To achieve proper operation with a sufficiently high coefficient of friction, the contact surfaces between shaft and hub must be clean and slightly oiled. Machine oil must be used as a lubricant. The functional surfaces of the locking assembly, threads and screw heads are prepared at the factory with oil film.