+49 (0) 2335 9781-0

TAS 3073 Mini Reihe

131

TAS 131

Product Information

Technical Specifications

Table

d (mm) D (mm)D1 (mm)M t (Nm)F ax (kN)p W (N/mm²)p N (N/mm²)Z (Stk.)SM A ( Nm)L (mm)L1 (mm)L2 (mm)Weight (kg)
20x475332033170706M 6 x 25173142480.42
22x475336033153706M 6 x 25173142480.39
24x505639033144706M 6 x 25173142480.43
25x505640033138706M 6 x 25173142480.42
28x556145033120606M 6 x 25173142480.51
30x556149033112606M 6 x 25173142480.48
32x606669043136708M 6 x 25173142480.57
35x606675043124708M 6 x 25173142480.54
38x657182043120708M 6 x 25173142480.63
40x657186043113708M 6 x 25173142480.58
42x7581130060126706M 8 x 30413551591.02
45x7581140060118706M 8 x 30413551590.99
48x8086190080150908M 8 x 30413551591.1
50x8086200080144908M 8 x 30413551591.08
55x8591220080136908M 8 x 30413551591.16
60x9096240080120808M 8 x 30413551591.24
65x95101260080105708M 8 x 30413551591.33
70x1101194600130126808M 10 x 30834661712.29
75x1151245000130120808M 10 x 30834661712.41
80x1201295200130107708M 10 x 30834661712.56
85x12513470001701329010M 10 x 30834661712.67
90x13013974001701178010M 10 x 30834661712.8
95x13514478001701148010M 10 x 30834661712.93
100x1451559800190115808M 12 x 351455268804.1
110x15516510700190101708M 12 x 351455268804.4
120x165175146002401229010M 12 x 351455268804.72
130x1801881900030013710012M 12 x 351455268805.74
140x190199230003301239010M 14 x 402305876906.92
150x2002093000040013610012M 14 x 402305876907.24
160x2102193200040013210012M 14 x 402305876907.76
170x2251343900046014511014M 14 x 402305876908.98
180x2352444100046013310014M 14 x 402305876909.5
190x2502594640048813710415M 14 x 4023058769011.1
200x2602694880048813110015M 14 x 4023058769011.7
220x285294599005441037912M 16 x 50360729811418.3

Description Of Function

The main function of a locking assembly is the safe connection of a shaft to a hub by means of friction. For example, between a shaft and a gear hub. The locking assembly creates a play-free connection by expanding between the shaft and the hub. This type of connection is used mainly for transmitting torque.

It is installed by inserting the locking assembly between the components and the subsequent tightening of the screws. By using conical surfaces, the outer diameter increases and the inner diameter reduces. Radial pressure is built up. The clamping forces are provided and controlled by the screws (force-controlled). This allows the direct compensation of the clearance between shaft and hub.

The supplied locking devices are ready for installation.

To achieve proper operation with a sufficiently high coefficient of friction, the contact surfaces between shaft and hub must be clean and slightly oiled. Machine oil must be used as a lubricant. The functional surfaces of the locking assembly, threads and screw heads are prepared at the factory with oil film.