+49 (0) 2335 9781-0

TAS 3073 Mini Reihe

3015.1-DK

3015.1-DK

Product Information

Technical Specifications

Table

d (mm) D (mm)M t (Nm)F ax (kN)p W (N/mm²)p N (N/mm²)Z (Stk.)SM A (Nm)L (mm)L1 (mm)L2 (mm)Weight (kg)
100x1457000139101699M10 x 055836065754.1
110x15585001551027210M10 x 055836065754.4
120x165111001851128112M10 x 055836065754.8
130x180151002321097915M10 x 060836874846.5
140x190162002321017515M10 x 060836874847
150x200185002471017616M10 x 060836874847.4
160x210223002781068118M10 x 060836874847.8
170x225291003431118415M12 x 06514575819310
180x235329003651118516M12 x 06514575819310.6
190x250391004111017718M12 x 075145889410614.3
200x260457004571078220M12 x 075145889410615
220x28552800480987521M12 x 0801459810411619.8
240x305658005481028124M12 x 0801459810411621.4
260x325802006171068527M12 x 0801459810411623
280x3551202008581118728M14 x 10023012012614035.2
300x3751287008581048328M14 x 10023012012614037.4
320x40518850011781149028M16 x 11035513514215851.3
340x42520030011781078628M16 x 11035513514215854.1
360x4552204001225907124M18 x 14048515816518375.4
380x4752618001378967727M18 x 14048515816518379
400x49532660016331088732M18 x 14048515816518382.8
420x51534290016331038432M18 x 14048515816518386.5
440x5453896001771977827M20 x 140690172180200110
460x5654073001771937627M20 x 140690172180200114
480x5854722001968998130M20 x 140690172180200119
500x6054919001968957830M20 x 140690172180200123
520x6305457002099867132M20 x 150690190200220148
540x6505667002099836932M20 x 150690190200220154
560x6706611002361907536M20 x 150690190200220160
580x6906847002361867336M20 x 150690190200220165
600x7107083002361847136M20 x 150690190200220170
620x7307319002361816936M20 x 150690190200220175
640x7507555002361786736M20 x 150690190200220180

Description Of Function

The main function of a locking assembly is the safe connection of a shaft to a hub by means of friction. For example, between a shaft and a gear hub. The locking assembly creates a play-free connection by expanding between the shaft and the hub. This type of connection is used mainly for transmitting torque.

It is installed by inserting the locking assembly between the components and the subsequent tightening of the screws. By using conical surfaces, the outer diameter increases and the inner diameter reduces. Radial pressure is built up. The clamping forces are provided and controlled by the screws (force-controlled). This allows the direct compensation of the clearance between shaft and hub.

The supplied locking devices are ready for installation.

To achieve proper operation with a sufficiently high coefficient of friction, the contact surfaces between shaft and hub must be clean and slightly oiled. Machine oil must be used as a lubricant. The functional surfaces of the locking assembly, threads and screw heads are prepared at the factory with oil film.