+49 (0) 2335 9781-0

TAS 3073 Mini Reihe


TAS 3015

Product Information

Technical Specifications


d (mm) D (mm)M t (Nm)F ax (kN)p W (N/mm²)p N (N/mm²)Z (Stk.)SM A (Nm)L (mm)L1 (mm)L2 (mm)Weight (kg)
70x1106900197187958M10 x 055835060702.2
80x120980024720410910M10 x 055835060702.5
90x1301220027120011111M10 x 055835060702.7
100x1451820036420111110M12 x 0601456070824.1
110x1552000036418310410M12 x 0601456070824.4
120x1652400040118510711M12 x 0601456070824.7
130x1803310051019311614M12 x 0651456579916.2
140x1903820054719211715M12 x 0651456579916.6
150x2004090054717911215M12 x 0651456579917
160x2104660058317911316M12 x 0651456579917.4
170x2256230073417911115M14 x 075230789210610.4
180x2356600073416910615M14 x 075230789210611
190x250743007821449416M14 x 0802308810211614.3
200x2609710097217011318M14 x 0802308810211615
220x28511000010071489815M16 x 0903559610812419.4
240x305161000134218112220M16 x 0903559610812421
260x325174000134216711420M16 x 0903559610812422.5
280x355219000156919612215M20 x 1006909611013028.2
300x375251000167419512316M20 x 1006909611013030
320x405334000209218111120M20 x 11069012413615647.1
340x425355000209217010520M20 x 11069012413615649.7
360x455469000261016010920M22 x 13093014015717966.8
380x475495000261015210420M22 x 13093014015717970.1
400x495574000287115911022M22 x 13093014015717973.4
420x515657000313216511524M22 x 13093014015717976.7
440x535689000313215711124M22 x 13093014015717979.9
460x555720000313215110724M22 x 13093014015717983.2
480x575782000326215010825M22 x 13093014015717986.5
500x595815000326214410425M22 x 13093014015717989.8
520x615950000365415511328M22 x 13093014015717993.1
540x635986000365415010928M22 x 13093014015717996.3
560x6551096000391515511330M22 x 130930140157179100
580x6751135000391514911030M22 x 130930140157179103
600x6951174000391514410730M22 x 130930140157179106

Description Of Function

The main function of a locking assembly is the safe connection of a shaft to a hub by means of friction. For example, between a shaft and a gear hub. The locking assembly creates a play-free connection by expanding between the shaft and the hub. This type of connection is used mainly for transmitting torque.

It is installed by inserting the locking assembly between the components and the subsequent tightening of the screws. By using conical surfaces, the outer diameter increases and the inner diameter reduces. Radial pressure is built up. The clamping forces are provided and controlled by the screws (force-controlled). This allows the direct compensation of the clearance between shaft and hub.

The supplied locking devices are ready for installation.

To achieve proper operation with a sufficiently high coefficient of friction, the contact surfaces between shaft and hub must be clean and slightly oiled. Machine oil must be used as a lubricant. The functional surfaces of the locking assembly, threads and screw heads are prepared at the factory with oil film.